Control systems
Magnetic powder brake
powder connection (powder clutch used in coil products under rolls. Cell pressure and tension control device according to the received information, minimum diameter, maximum diameter of the same TENSION in USDER PRODUCT RAD coil and PRODUCT PROCLUTCHLOOWLS P. Tension control device from The received information provides the product packaging with the same tension from the minimum diameter to the maximum diameter.
Pneumatic brake
Pneumatic air brake; They are used to hold moving and rotating parts of the machine in constant traction or to stop them in a shorter time. The principle of work; The system is air-driven, the diaphragm in the air tank pushes the compressor forward, and the shoes hold the rotating disc. When the air is drained, the propulsion returns through the spring and the braking process ends.
Web guide
Microprocessor based high precision Automatic center speed constant speed, sensor dependent and line speed dependent function Ability to use mechanical or electronic switch for Limit Stop Turkish / English language option Product release control Easy to use and easy installation Ability to make calls at the end of the set time When limit switches come Simultaneous operation of line speed Ability to view defects on the screen Ability to store values in memory when power outages Ability to see the status of the product edge defect on the screen
Web guide
As a result of line navigation (web guide control), improper packaging of rolled materials or mechanical problems, problems occur during product processing. This results in wastage, reduced performance or poor quality. To prevent this problem, the web control system enters the game. The Unity Web Control System tracks the edge of the product to open or close the product. This is a very innovative system. Mechanical assembly is very simple. Provides quality, speed and minimum waste. Offers high accuracy with stepper motor. Depending on the material, it can be used with an ultrasonic fork sensor, optical fork sensor or color sensor. We have special production solutions according to the Unity Web Guide control system, product type, width and device status.
Edge and tension control systems
• Digital optocoupler outputs • Simultaneous operation line speed • Auto-centering capability • Fixed, sensor-dependent and speed-dependent line operation • Automatic / manual external input • Ability to view screen defects
• Easy to use and easy to install
• Save values in memory when the power goes out
• high sensitivity
• Enable Start and Stop with the time set for contacts to go out
• Turkish / English language option
• End of limit protection
• Microprocessor based
Ultrasonic and optical sensor fork
Optical sensors include a transmitter with a light source, a receiver (receiver) of reflected light, and an electronic system that amplifies, processes, and outputs the receiver signal. Optical sensors are suitable for lining fabric and felt.
| 0-5V | 0-10V | 4-20mA | npn/npn | |
| BESLEME GERİLİMİ(SUPPLY VOLTAGE) | 12/24 Vdc | 12/24 Vdc | 12/24 Vdc | 12/24 Vdc |
| AKIM(CURRENT) | 50 mA | 50 mA | 50 mA | 50 mA |
| ÇATAL GENİŞLİGİ(FORK WIDTH) | 55 | 55 | 55 | 55 |
| ANALOG ÇIKIŞI(ANALOG OUTPUT) | 0-5V | 0-10V | 4-20mA | npn/npn |
| ÇALIŞMA SICAKLIĞI(WORKING TEMPERATURE) | 0 / 50 ° C | 0 / 50 ° C | 0 / 50 ° C | 0 / 50 ° C |
Tension control system
Liner system with stepper motor
Liner
Linear actuator controlled by Ulak stepper motor is suitable for edge control systems and special machine applications. There is no maintenance problem. It works very accurately thanks to the seamless nut system used. Ulak linear actuators can be custom made outside of standards.
Loader
Round load cell (load cell) is produced to control tension in coil-discharge pulleys. Detects the force applied to the roll during the winding or discharge process by mounting it at the end of the roll on the bearing placed on the bearing on the load cell. The field is widely used in the textile and printing industry. The aluminum body is specially anodized, which increases its corrosion resistance and gives it a beautiful appearance. General use areas – Capacity stress control applications are produced in capacities of 25,50,100 kg.
